Hi

I am wondering if there anything can automate opening and shutting down water through angle valve?

  • Brkdncr@sh.itjust.worksEnglish
    1·
    10 months ago

    I don’t think so. There are main shutoff valves and also hot water heaters with a built in smart valve.

  • UnorthodoxEng@alien.topBEnglish
    1·
    10 months ago

    Previously I’ve achieved similar using an RC Servo with a fabricated bracket.

    The reason I didn’t use a typical motorised valve is I wanted proportional control of the flow, not just on/off.

    If this is a Radiator Valve, there are plenty of off the shelf solutions, replacing the whole valve. Some of them will talk to home automation systems.

    • its_me1001@alien.topOPBEnglish
      1·
      10 months ago

      Thanks for sharing! Proportional flow control is ideal! It will be great to share some links of the tools/parts that would help me to start this project

      • UnorthodoxEng@alien.topBEnglish
        1·
        10 months ago

        I did it by measuring the torque required to turn the valve (using a spring balance on the end of a lever which operated the valve.

        Then bought a servo which had about double that torque rating - just so it has some in the bag if needed & won’t be over-stressed long term.

        I fabricated a bracket for mine - but this could more easily be 3D Printed.

        Then used an ESP32 (Arduino kind of thing) to control the servo.

        Unfortunately, I have no links or guides for you to follow - you’ll have to figure it out as you go.

  • venquessa@alien.topBEnglish
    11·
    10 months ago

    Replace with a springloaded pin valve and use an electro-thermal actuator.

    Aka, automated radiator valve.