I blocked the user “paywall” some time ago what would make their post show up again?
I blocked the user “paywall” some time ago what would make their post show up again?
A classic from Monty Python at the Hollywood bowl, Only Eric said “American beer” and at the time he was right, all you could get was crappy tasteless rice beer.
Strands #202
“I've got the music in me!”
🔵🟡🔵🔵
🔵🔵
I fell for the steak.
Connections
Puzzle #468
🟨🟩🟦🟪
🟨🟨🟨🟨
🟩🟩🟩🟩
🟦🟦🟦🟦
🟪🟪🟪🟪
Tightrope, a daily trivia game | Britannica
Sep. 21, 2024
T I G H T R O P E
✅ ✅ ✅ ✅ ✅ ✅ 💔 ✅ ✅ 🎉
My Score: 2090
Connections
Puzzle #466
🟩🟩🟩🟩
🟦🟦🟦🟦
🟨🟨🟨🟨
🟪🟪🟪🟪
It looks like 440 grade stainless and is non-magnetic. It tried with a very strong Neodymium magnet. Also most mash tuns i’ve seen are either made from a cooler, copper or stainless pot and stirred with a motor in the lid, if they are stirred at all, usually just the sparging arm rotates. I don’t think I’ve ever seen one with a magnetic stirrer not even sure how that would work through the grains.
It was a used Keezer I picked up from Craig’s list, I took my time disassembling, cleaning, and reassembling / rewiring so now the seller is no longer contactable to ask.
These are solid, not a tube.
The handles are threaded and these are not.
The groove defiantly looks like a detent, the kegs do have a lever that lifts to open them but there is no hole for this to fit.
To big for a beetle, maybe Crazy Frog’s handle bar?
Nope, solid. The angle is about 25° and is the same on both sides. I have four of them all identical. The Keezer is a 4 keg system but nothing I can find shows these as a part for the kegs, regulators, beer faucets, etc.
That just looks like discoloration that sheet metal gets with repeated heating. I would investigate the controls, there are contacts that open/close as a bimetallic strip heats up and cools off (basic thermostat). if the contact are arcing or stuck it could over heat, also since you said smoke was coming from the knob. . .
Depends on the lock being actuated and the torque of the servo, I have some that can do 4.4 N-m.
https://www.amazon.com/high-torque-servo/s?k=high+torque+servo
A stepper motor would also work for sure.
If you have some electronic skill you can use espHome on a esp32 microcontroller to control an RC Servo motor.
https://esphome.io/components/servo.html
If you want out-of-box there are several electronic locks that will work.
https://community.home-assistant.io/t/smart-locks-compatible-with-home-assistant/590662
Strands #195
“Elements of style”
💡🔵🔵🔵
🔵🔵🟡🔵
Connections Puzzle #473 🟦🟦🟦🟦 🟨🟨🟨🟨 🟩🟩🟩🟩 🟪🟪🟪🟪