So on the integra the front turn signal is made oit of two bulbs, I need the one circled in red to be white to pass inspection in my country. The problem is the bulb itself is white, but there is an orange filter inside and I cannot remove it.

My idea was to put in a bright blue bulb in there to compensate for the orange filter and make it appear white. Is that doable? Has anyone tried?

  • dan
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    I don’t have an example to show you I’m afraid.

    You’re thinking of mixing two separate light sources. You’re right that if you had a pure blue light and a pure orange (well, yellow) light, and pointed them both exactly at the same spot (and you balanced their relative intensity properly), the resulting light would appear white.

    But you’re not talking about that. You’re talking about filtering light, which is subtractive not additive like mixing light. So your blue light will either be pure blue (eg led) and have no red or green in it, or it’ll be white light that’s passed through a filter removing red and green. Then you’ll pass it through another filter that will remove the blue to leave the red and green. But there’s no red and green to remove, so with a perfect filter and a perfect blue light you’ll get nothing.

    (Actually a bit more complicated cos you can have pure orange/yellow light, it doesn’t have to be red light plus green light, but the result is mostly the same)

    So probably you’ll end up getting some muddy coloured light out. Which might end up looking blue or orange from different angles.

    It looks like the orange part is the reflector, and the front is actually transparent. Perhaps you can cover the back of the bulb to reduce the light hitting the orange part? Long shot tho.

    • DominicHillsun@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Honestly I am unsure whats exactly going on inside, it seems to me I will have to somehow source the clear turn signals.

      As for the filter, if I manage to overpower it using blue LED’s, in theory it should be white/blueish, just depends how well (or in this case bad) it filters, right?

      • dan
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I think you should find a way to try it - even if it’s just to convince yourself it won’t work! Perhaps take the bulb out and just shine some blue light in there to see what happens.

        I don’t know whether it’ll look blue or orange or greenish or muddy and dull (depends on the filter and the bulb) but it sure as fuck won’t look white :)

        If the orange is only on the reflector, and the front of the bulb shines straight out through the transparent part then you might be able to block the light coming from the back of the bulb (in fact blue might work for that), but if there’s more complicated optics going on I don’t know what you can do. It’s just not very possible to get white light out if most of it goes through an orange filter or reflects off an orange surface.