FAQ
- When (first) orbital flight? First integrated flight test occurred April 20, 2023. “The vehicle cleared the pad and beach as Starship climbed to an apogee of ~39 km over the Gulf of Mexico – the highest of any Starship to-date. The vehicle experienced multiple engines out during the flight test, lost altitude, and began to tumble. The flight termination system was commanded on both the booster and ship.”
- Where can I find streams of the launch? SpaceX Full Livestream. NASASpaceFlight Channel. Lab Padre Channel. Everyday Astronaut Channel.
- What’s happening next? SpaceX has assessed damage to Stage 0 and is implementing fixes and changes including a water deluge/pad protection/“shower head” system. No major repairs to key structures appear to be necessary.
- When is the next flight test? Just after flight, Elon stated they “Learned a lot for next test launch in a few months.” On April 29, he reiterated this estimate in a Twitter Spaces Q&A (summarized here), saying “I’m glad to report that the pad damage is actually quite small,” should “be repaired quickly,” and “From a pad standpoint, we are probably ready to launch in 6 to 8 weeks.” Requalifying the flight termination system (FTS) and the FAA post-incident review will likely require the longest time to complete. Musk reiterated the timeline on May 26, stating “Major launchpad upgrades should be complete in about a month, then another month of rocket testing on pad, then flight 2 of Starship.”
- Why no flame diverter/flame trench below the OLM? Musk tweeted on April 21: “3 months ago, we started building a massive water-cooled, steel plate to go under the launch mount. Wasn’t ready in time & we wrongly thought, based on static fire data, that Fondag would make it through 1 launch.” Regarding a trench, note that the Starship on the OLM sits 2.5x higher off the ground than the Saturn V sat above the base of its flame trench, and the OLM has 6 exits vs. 2 on the Saturn V trench.
Quick Links
RAPTOR ROOST | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE
Starship Dev 46 | Starship Dev 45 | Starship Dev 44 | Starship Dev 43
Official Starship Update | r/SpaceX Update Thread
Status
Road Closures
| Type | Start (UTC) | End (UTC) | Status |
|---|---|---|---|
| Primary | 2023-08-04 13:00:00 | 2023-08-05 01:00:00 | Possible |
| Alternative | 2023-08-06 13:00:00 | 2023-08-07 01:00:00 | Possible |
| Alternative | 2023-08-07 13:00:00 | 2023-08-08 01:00:00 | Possible |
Up to date as of 2023-08-04
Vehicle Status
As of July 28th 2023
Follow Ring Watchers on Twitter and Discord for more.
| Ship | Location | Status | Comment |
|---|---|---|---|
| S15 | Rocket Garden | Scrapped | |
| S20 | Rocket Garden | Retired | |
| S24 | Gulf of Mexico | Destroyed | Destroyed on during Flight Test 1 |
| S25 | Launch Site | Testing | Spin Prime and Static Fire |
| S26 | Rocket Garden | Resting | No fins or heat shield, plus other changes. |
| S27 | Rocket Garden | Scrapped | Common dome imploded |
| S28 | Rocket Garden | Pending Raptor install | Previously tested at Masseys |
| S29 | High Bay 1 | Under construction | |
| S30 | Build Site | Under construction | |
| S31 | Build Site | Parts under construction | Assorted parts spotted through S34. |
| Booster | Location | Status | Comment |
|---|---|---|---|
| Pre-B7 & B8 | Scrapped or Retired | B4 is in the Rocket Garden, the rest are scrapped. | |
| B7 | Gulf of Mexico | Destroyed | Destroyed April 20th in Flight Test 1 |
| B9 | Mega bay | Pending raptor swap and hot-stage ring install | Static fire (August 5th) |
| B10 | Masseys | Testing | Cryo testing |
| B11 | Rocket Garden | Resting | |
| B12 | Megabay | Raceways installed | |
| B13 | Build Site | Parts under construction | |
| B14 | Build Site | Parts under construction | |
| B15 | Build Site | Parts under construction |
Resources
- LabPadre Channel | NASASpaceFlight.com Channel
- NSF: Booster 7 + Ship X (likely 24) Updates Thread | Most Recent
- NSF: Boca Chica Production Updates Thread | Most recent
- NSF: Elon Starship tweet compilation | Most Recent
- SpaceX: Website Starship page | Starship Users Guide (2020, PDF)
- FAA: SpaceX Starship Project at the Boca Chica Launch Site
- FAA: Temporary Flight Restrictions NOTAM list
- FCC: Starship Orbital Demo detailed Exhibit - 0748-EX-ST-2021 application June 20 through December 20
- NASA: Starship Reentry Observation (Technical Report)
- Hwy 4 & Boca Chica Beach Closures (May not be available outside US)
- Production Progress Infographics by @RingWatchers
- Raptor 2 Tracker by @SpaceRhin0
- Acronym definitions by Decronym
- Everyday Astronaut: Starbase Tour with Elon Musk, Part 1 | Part 2 | Part 3
- Everyday Astronaut: 2022 Elon Musk Interviews, Starbase/Ship Updates | Launch Tower | Merlin Engine | Raptor Engine
New comment from /u/santacfan on Reddit:
Starbase Live-
12:33am- S28 arrives at rocket garden
1:05am- Lift goes up to hook the crane to S28
1:06am- Workers return to the OLM
6:55am- 2 Concrete trucks pull in at the OLM
7:06am- 3rd concrete truck
7:09am- S25 lifted off of the suborbital pad
7:15am- Set down on the transport stand
7:19am- 4th concrete truck. Pouring somewhere behind the doghouse by the OLT
8:12am- S28 lifted on to the raptor install stand
11:09am- B9’s transport stand is moved over to the sub orbital pad area
11:56am- Last segment of the 5th level of the new mega bay lifted
2:12pm- Workers disconnecting S25 from the crane
2:21pm- Worker cleaning off the top of the raptor install stand
2:42pm- Workers cleaning under the OLM and pressure washing the deluge plate
5:55pm- Squid finally disconnected from S25
8:25pm- Raptor install stand moves from behind S25 to in front of it. Looks like it might roll back tonight as well
(This gets synced)