FAQ
- When (first) orbital flight? First integrated flight test occurred April 20, 2023. “The vehicle cleared the pad and beach as Starship climbed to an apogee of ~39 km over the Gulf of Mexico – the highest of any Starship to-date. The vehicle experienced multiple engines out during the flight test, lost altitude, and began to tumble. The flight termination system was commanded on both the booster and ship.”
- Where can I find streams of the launch? SpaceX Full Livestream. NASASpaceFlight Channel. Lab Padre Channel. Everyday Astronaut Channel.
- What’s happening next? SpaceX has assessed damage to Stage 0 and is implementing fixes and changes including a water deluge/pad protection/“shower head” system. No major repairs to key structures appear to be necessary.
- When is the next flight test? Just after flight, Elon stated they “Learned a lot for next test launch in a few months.” On April 29, he reiterated this estimate in a Twitter Spaces Q&A (summarized here), saying “I’m glad to report that the pad damage is actually quite small,” should “be repaired quickly,” and “From a pad standpoint, we are probably ready to launch in 6 to 8 weeks.” Requalifying the flight termination system (FTS) and the FAA post-incident review will likely require the longest time to complete. Musk reiterated the timeline on May 26, stating “Major launchpad upgrades should be complete in about a month, then another month of rocket testing on pad, then flight 2 of Starship.”
- Why no flame diverter/flame trench below the OLM? Musk tweeted on April 21: “3 months ago, we started building a massive water-cooled, steel plate to go under the launch mount. Wasn’t ready in time & we wrongly thought, based on static fire data, that Fondag would make it through 1 launch.” Regarding a trench, note that the Starship on the OLM sits 2.5x higher off the ground than the Saturn V sat above the base of its flame trench, and the OLM has 6 exits vs. 2 on the Saturn V trench.
Quick Links
RAPTOR ROOST | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE
Starship Dev 47 | Starship Dev 46 | Starship Dev 45 | Starship Dev 44
Official Starship Update | r/SpaceX Update Thread
Status
Road Closures
| Type | Start (UTC) | End (UTC) | Status |
|---|---|---|---|
| Primary | 2023-08-24 13:00:00 | 2023-08-25 01:00:00 | Cancelled |
| Alternative | 2023-08-25 14:00:00 | 2023-08-26 02:00:00 | Concluded |
| Alternative | 2023-08-28 13:00:00 | 2023-08-27 01:00:00 | Cancelled |
Up to date as of 2023-09-05
Vehicle Status
As of 2023-09-05
Follow Ring Watchers on Twitter and Discord for more.
| Ship | Location | Status | Comment |
|---|---|---|---|
| S20 | Rocket Garden | Retired | |
| S24 | Gulf of Mexico | Destroyed | Destroyed on during Flight Test 1 |
| S25 | Stacked on B9 | Spin Prime and Static Fire | |
| S26 | Rocket Garden | Cryo tested | |
| S27 | Rocket Garden | Scrapped | Common dome imploded |
| S28 | Engine Install Stand | Raptors installed | Previously tested at Masseys |
| S29 | High Bay | Under construction | Flap installation in progress |
| S30 | High Bay | Under construction | |
| S31 | High Bay | Under construction | |
| S32 | Build Site | Parts spotted | |
| S33 | Build Site | Parts spotted | |
| S34 | Build Site | Parts spotted |
| Booster | Location | Status | Comment |
|---|---|---|---|
| Pre-B7 & B8 | Scrapped or Retired | B4 is in the Rocket Garden, the rest are scrapped. | |
| B7 | Gulf of Mexico | Destroyed | Destroyed April 20th in Flight Test 1 |
| B9 | Launch mount | Hot-stage ring installed | Static fire (August 5th) |
| B10 | Megabay 1 | Cryo tested | |
| B11 | Rocket Garden | Resting | |
| B12 | Megabay 1 | Grid fins installed | |
| B13 | Build Site | Parts under construction | |
| B14 | Build Site | Parts under construction | |
| B15 | Build Site | Parts under construction |
Resources
- LabPadre Channel | NASASpaceFlight.com Channel
- NSF: Booster 7 + Ship X (likely 24) Updates Thread | Most Recent
- NSF: Boca Chica Production Updates Thread | Most recent
- NSF: Elon Starship tweet compilation | Most Recent
- SpaceX: Website Starship page | Starship Users Guide (2020, PDF)
- FAA: SpaceX Starship Project at the Boca Chica Launch Site
- FAA: Temporary Flight Restrictions NOTAM list
- FCC: Starship Orbital Demo detailed Exhibit - 0748-EX-ST-2021 application June 20 through December 20
- NASA: Starship Reentry Observation (Technical Report)
- Hwy 4 & Boca Chica Beach Closures (May not be available outside US)
- Production Progress Infographics by @RingWatchers
- Raptor 2 Tracker by @SpaceRhin0
- Acronym definitions by Decronym
- Everyday Astronaut: Starbase Tour with Elon Musk, Part 1 | Part 2 | Part 3
- Everyday Astronaut: 2022 Elon Musk Interviews, Starbase/Ship Updates | Launch Tower | Merlin Engine | Raptor Engine
New comment from /u/santacfan on Reddit:
Starbase Live-
11:14pm- Shielding gets lifted again
3:57am- Crane detached from the shielding
6:56am- Second crane arrives by the OLM
7:42am- Original crane leaves
8:59am- Next piece of shielding for the right side of the staircase is lifted. This will bring the shielding on both sides even
9:20am- Work continued on the BQD area overnight. The aerial work platform continued inspecting the chopsticks rail on the left side as well.
9:46am- Crane disconnected from shielding
10:21am- Next piece of shielding goes up on right side. Slanted piece that should support the roof structure over the doorway
1:25pm- Crane detached from shielding
1:33pm- Aerial work platform goes up to the SQD arm. (Workers are inspecting the bottom of the arm)
1:38pm- Crane lifts final piece of shielding to the left side of staircase.
5:26pm- Crane detaches from shielding and lowers (That’s 3 pieces for 1st shift. They’re getting it done today).
9:00pm- Lifts up at the OLM, staircase, and chopsticks
(This gets synced)
Took a bit of work, the automation broke because of a backwards incompatible api change in the Lemmy JS client, but should be good now!