I shared a video of the problem, it’s hard to describe with words. Can you help me solve it?

  • JackGreenEarthOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    A socket? I will consider buying one along with gloves, thanks.

      • JackGreenEarthOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I got a socket just now, but when I unscrewed the nozzle and tried to extrude some filament, the wheel turned but no filament was extruded. I saw a faint strand of unmelted filament in the hole for the nozzle. Here is a video.

        • CmdrShepard@lemmy.one
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          You’ll probably want to strip the whole hotend apart and see what the deal is. Without a nozzle, you should be able to just push the filament through by hand (after loosening the tension arm). I wonder if your PTFE tube is bad. Not sure how your extruder is setup, by my direct drive Volcano clone’s filament path is extruder gear > plastic filament guide > PTFE tube > heat break > nozzle. One of those things is bad. Tear it apart and inspect each part for damage and ensure you can easily feed filament through each part.

          • JackGreenEarthOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I’ll have to contact the manafacturers, it shouldn’t be breaking this often when I use it normally.

            • CmdrShepard@lemmy.one
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              You can if it’s under warranty but this is pretty typical of the hobby unleas you’re buying a real high-end machine.

              • JackGreenEarthOP
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Really, having a problem every week? Anyway, it is under warranty for the first year, and it’s been just over a month, so I’m safe.