Does anyone know if hopbursting makes the beer less clear?

I recently made a APA with only late hopadditions and it came out looking more like a NEIPA.

  • baconeater
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    What do you mean by hop bursting? Dry hopping? Omega yeast have done studies on dry hop timing and resultant haziness (or lack thereof) in finished beer.

      • baconeater
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        What yeast are you using? Actually, would be helpful to just see the whole recipe.

        • David_H@lemmy.fmhy.mlOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Ok, some of this is in Swedish but you should understand the important stuff

          American Pale Ale

          Typ: Helmalt IBU : 40 (Tinseth) BU:GU : 0.74 Färg : 14 EBC Kolsyresättning : 2.4 CO2-vol Densitet innan kok : 1.048 Original Gravity : 1.054 Final Gravity : 1.011 30l Kastrull + lauterhelix Satsvolym : 20 L Kokvolym : 28 L Volym efter kok : 25 L Mäskvatten : 18.08 L Lakvatten : 17.49 L Lakvattentemperat.: 76 °C Satslakning : 1.05 L + 16.44 L Koktid : 60 min Total vattenvolym : 35.57 L Totalt utbyte: 60% Mäskutbyte: 72%

          Extraktgivare (5.69 kg) 3.986 kg - Pale Malt 6.5 EBC (70%) 1.139 kg - Munich I 15 EBC (20%) 342 g - Carapils/Carafoam 3.9 EBC (6%) 228 g - Melanoidin 59 EBC (4%)

          Humle (167.1 g) 30 min - 11.9 g - Columbus (Tomahawk) - 14% (… 15 min - 11.9 g - Centennial - 10% (6 IBU) 15 min - 11.9 g - Columbus (Tomahawk) - 14% (… 5 min - 11.9 g - Centennial - 10% (3 IBU) 5 min - 11.9 g - Citra - 12% (3 IBU) 5 min - 11.9 g - Columbus (Tomahawk) - 14% (4… 1 min - 11.9 g - Centennial - 10% (1 IBU) 1 min - 11.9 g - Citra - 12% (1 IBU) 1 min - 11.9 g - Columbus (Tomahawk) - 14% (1…

          Torrhumle (dryhop) 3 dagar - 20 g - Centennial - 10% 3 dagar - 20 g - Citra - 12% 3 dagar - 20 g - Columbus (Tomahawk) - 14%

          Övrigt Mäskning - 2 g - Calcium Chloride (CaCl2) Mäskning - 5 g - Gypsum (CaSO4) Mäskning - 2 ml - Lactic Acid 80% Lakning - 1.72 g - Calcium Chloride (CaCl2) Lakning - 4.29 g - Gypsum (CaSO4) 15 min - Kok - 0.5 g - Protafloc 15 min - Kok - 1 tsk - Yeast Nutrients

          Jäst 2 pkt - Fermentis Safale American US-05

          Mäskschema High fermentability 72.9 °C - Inmäskningstemp 67 °C - 60 min - Temperatur

          • baconeater
            link
            fedilink
            English
            arrow-up
            4
            ·
            1 year ago

            So looking at the recipe (which I’m happy to say was far easier for me to understand given how little Swedish (read:none) I know), nothing in the grain bill or the yeast selection should affect clarity. Therefore I have to assume it is the “hop bursting” that is the cause of the haziness. It looks like you have 83.3g total (just under 3oz for any Americans reading) in the last 5 minutes of the boil, not to mention another further 60g (~2oz) as a dry hop. My guess is because the hops are added so late into the hot side, a large quantity of the hop oils is making it into the beer (note: this is certainly not a bad thing!), where they are binding to proteins in the wort to form what is known as colloidal haze. This is a fantastic scientific paper which goes extremely in depth into the properties of haze in beer and the causes of them.

            My recommendations for you to help minimize the haze would be firstly:

            • To lower the amount of carapils/carafoam since it seems that dextrin (which are unfermentable) can possibly be a culprit for contributing to haze.
            • Possibly to do a 10-15 minute protein rest (at around 43°C (119°F)) before bringing the wort up to the saccharification rest (between 61-71°C (142-162°F)) to lower the protein content of the beer somewhat which also should help. (Note: this will likely have a detrimental effect of head retention)
            • Adding gelatin to the final beer before packaging can be very effective at removing certain types of haze. See here for more info