Does anyone have a full guide on how to host a web server behind a Starlink connection?

I manage to host web servers on IPv4 connections but I am pretty lost with IPv6. I don’t want to use a VPS or anything external.

My Starlink router is in bypass mode and I use a TP-Link AX3000 router

  • I have disabled the TP-Link router firewall
  • I have enabled IPv6 address in the router settings
  • I host a webserver (nginx) on my laptop and can access the page (on http://[::1]). No HTTPS set-up for the moment
  • I have disable ufw on my laptop
  • I have set-up a AAAA record on No-IP with the IPv6 address I get from https://test-ipv6.com/

It’s not working!

Which IPv6 address am I supposed to provide on No-IP, the one of my router or my laptop?!

I also have multiple IPv6 adresses on my laptop, which one should be used and why?

2: wlp1s0:  mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 48:e7:da:0e:52:2f brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.10/24 brd 192.168.0.255 scope global noprefixroute wlp1s0
       valid_lft forever preferred_lft forever
    inet6 2a0d:3344:89:e00:1287:789:2313:f88a/64 scope global temporary dynamic 
       valid_lft 295sec preferred_lft 295sec
    inet6 2a0d:3344:89:e00:132:2409:c6d:ce09/64 scope global dynamic mngtmpaddr noprefixroute 
       valid_lft 295sec preferred_lft 295sec
    inet6 fe80::6259:1c60:1deb:705e/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

Thanks

​

  • FroSSTII@alien.topBEnglish
    2·
    11 months ago

    I would recommend to make sure your ports are actually open, there are many online port scanners. You would want to set No-IP with your router IPv6 address. When scanning you would want to put the No-IP address you configured or the router IPv6 address.

    I would highly recommend to not disable the firewall on your router but to port forward the ports you need (80/443) in your case.

    If you are able to ping the No-IP address, and it gets resolved to your router address than its working.

    • Vicolaships@alien.topOPBEnglish
      1·
      11 months ago

      It works with new router with the IPv6 firewall disabled. Can you help me figure out what is wrong in my configuration because when I enable the firewall it doesn’t work?