So my Sofirn SP10 Pro was freaking out today. I don’t think it was some weird mode I got into but whatever it was, I couldn’t get out of that messed up state. As I was going to bed I realized and Anduril is awesome and there must be some reset procedure. Looked it up and had my flashlight working again and back in advanced UI in under a minute.

I really appreciate ToyKeeper and the awesome programming she has done.

  • AItoothbrush@lemmy.zip
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    Yeah sadly not every light can use it. Im working on a flashlight and im going to put rgb aux leds in it but anduril doesnt support it. Im also testing if a fan is worth it and thats another thing anduril doesnt support. I also want to have some controlls of the charging from the ui. If anyone can do these with anduril i would happily use it.

    • bpcomp@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I don’t know about fan control but Anduril does support RGB aux lights. Here is the Anduril manual showing how to change RGB colors of the aux led.

      • AItoothbrush@lemmy.zip
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Yeah but anduril only has low and high for every colour while i want gradual(prolly 8 bits) control of all three channels(rgb)

        • bpcomp@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Fair enough. Seems like it could be programmed in but I don’t know if it requires more memory or processing than is standard for flashlight controllers. But if it’s a custom light, then you can design your control board to have more umpf and use a customized firmware.

        • jerv@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          I believe that with the aux lights, it’s a hardware limitation.

          The TiTS10 has the new multi-channel Anduril that allows you to enable each color of aux as a channel; try 9H from On and keep holding. However, it only has them on High with 1H/2H doing nothing. You can 3C between them and normal operation (Channel 1; main emitters), but that’s it.

          • AItoothbrush@lemmy.zip
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Yeah the chips dont have enough I/O. I couldnt find any vidoes showing the aux of the TS10. I could maybe have another chip store the values of rgb so you can set them with 1H for each colour and then go back to normal operation.