• Zaphod@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 year ago

    The performance boost in Hitman 3 is interesting. Probably results from being able to keep a more consistent clock speed during intensive scenes because of lowered temps

      • filister@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        It lowers the temperature of the SOC allowing the CPU and GPU to run for longer periods without throttling. Meaning that you will have more consistent frames and low 1%.

  • lea@feddit.de
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    This convinced me to play around with undervolting and I managed to do -50/-50/-40 (cpu/gpu/soc) while still passing furmark and all mprime tests, now I can play Stardew Valley for even longer!

    • kadu@lemmy.world
      link
      fedilink
      English
      arrow-up
      14
      ·
      1 year ago

      Undervolting aims to keep the same performance at a lower power draw. But because modern SOCs scale their frequency dynamically based on temperature, a lower voltage means slightly better performance

        • kadu@lemmy.world
          link
          fedilink
          English
          arrow-up
          9
          ·
          1 year ago

          Yes. Essentially, every chip coming out of the fab will be slightly different, so you need to find a voltage curve that works for all of them. Some will be able to work with - 50mv, some -15, some won’t work at all unless they’re right at that factory defined voltage.

    • ylai@lemmy.mlOPM
      link
      fedilink
      English
      arrow-up
      9
      ·
      1 year ago

      Undervolting provides the chip with additional power and thermal headroom, and can improved situations where otherwise throttling sets in.

    • David_Eight@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Think of amps and volts like a hose and water. If you put your thumb over the hose the water shoots out faster. Undervolting works in a similar way. So the goal is to lower the volts but maintain or even increase the amps to improve performance.