I have always wanted to try printing larger, using a bigger nozzle - just got around to swapping to a .6mm in my MK3S+. Printed a gift for a childhood friend. 300% size. Took just under 10 hrs. With the slicer settings on .4mm it was over 17hrs.

  • Contend6248@feddit.deEnglish
    2·
    7 months ago

    Did you play around with different filament settings or presets? Most importantly extrusion multiplier?

    Measuring the filament might be a good idea too, maybe slight differences are becoming visual with a bigger nozzle

    • RubberElectrons@lemmy.worldEnglish
      1·
      7 months ago

      Thanks for the ideas, yeah I’ve tried playing around with the presets and such, and I’m fairly certain the filament itself is good, matterhackers pro PETG.

      When I have a moment I’ll be trying to make an extrusion tower to test settings.

      • Aux@lemmy.worldEnglish
        1·
        7 months ago

        PETG is very leaky. It’s not a big deal with 0.4, but becomes a pain with 0.6. Try to set a higher printing speed.