• chitak166@lemmy.world
    link
    fedilink
    arrow-up
    26
    arrow-down
    5
    ·
    11 months ago

    No joke, it’s all the seltzer marketing that gets people to spend way more on way less alcohol.

    It was successful as fuck. Just look at all the streamers shilling it.

    • papalonian@lemmy.world
      link
      fedilink
      arrow-up
      15
      arrow-down
      1
      ·
      11 months ago

      How is it spending way more on way less alcohol? In my area a 12 pack of Trulys is comparable to a 12 pack of Corona and they have roughly the same alcohol content

    • paraphrand@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      edit-2
      11 months ago

      Correct me if I’m wrong, but I think hard Seltzer is technically classified as beer?

      It says “BEER” on the back of White Claw cans.

      Can you clarify your point?

      • SolidGrue@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        11 months ago

        If I was making hard seltzer at scale, I’d consider two options:

        1. Cut some Everclear 97% and some flavorant into water, and throw 30psi of CO2 on for it a few days (expensive)

        2. Ferment some dextrose, rack it off the yeast cake, add some flavorant, and throw 30psi of CO2 on it for a few days (cheap)

        My hombrew club hated me.

        • paraphrand@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          11 months ago

          What you are doing probally does not sound as romantic as what they are doing. 🤣

          • hydrospanner@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            11 months ago

            The way they’re produced en masse is that high alcohol “beer” is brewed for maximum sugar content and minimal flavors, and then it’s aged, filtered, and in some cases concentrated for shipment.

            Usually this neutral malt alcohol base is used on site at around 14% but if it is to be shipped it’s usually concentrated to liquor levels for economy of scale.

            When it’s time to make a seltzer it’s not “brewed” as such, but simply blended with industrial scale batching equipment. Basically a big tank of water with a pipe loop that runs the contents of the tank in circulation, and has ports for adding flavoring and the alcohol base.

            Once the batch is at the right flavor and ABV it can be held in storage or sent to canning/bottling, with compressed CO2 injected into the liquid line just before the point where it goes into the can or bottle.