my laptop resolution is 2256x1504, while my monitor has standard 1920x1080. when I start Pop is always default 200% scale, even I changed it to 100% before. I have to manually set it to 100% scale on my laptop and monitor. But it would not sustain. When I unplug hdmi and reconnect, everything goes back to default. Is there any ways I can optimize this? thank you

  • a1mlezz@lemmy.worldEnglish
    4·
    10 months ago

    I was able to set different scales for laptop screen and monitor after enabling Wayland and these settings stay the same.

    To do that you need to:

    • set WaylandEnable=true in /etc/gdm3/custom.conf
    • reboot
    • at the log in screen, there is a small gear wheel on the bottom right side, choose “Pop on Wayland” instead of “Pop”
    • humuhumuOPEnglish
      1·
      10 months ago

      and these settings stay the same.

      To do that you need to:

      set WaylandEnable=true in /etc/gdm3/custom.conf
reboot
at the log in screen, there is a small gear wheel on the bottom right side, choose “Pop on

      thanks, I will try that, is there any issue with wayland so far? cause its no t officially enabled yet

      • a1mlezz@lemmy.worldEnglish
        11·
        10 months ago

        I think some people have issues with Nvidia cards, but I don’t have one and haven’t had any issues.

  • humuhumuOPEnglish
    1·
    10 months ago

    currently on pop os 22.04, kernel 6.6.6