Slaac does everything for you. You get dynamic public addresses that change (you can disable if you please). Nothing to deal with, just open a firewall port if you want to receive traffic
I want static addresses on my LAN, and addresses I can remember and easily recognize in a list. And I don’t want my devices to have unique addresses outside my LAN, especially not static ones. NAT is great.
See, what both of you wrote is completely alien and confusing to me. The look of IPv6 gives me an aneurysm. Let me keep my IPv4. You can run IPv6 on your own LAN. I’m not stopping you.
It’s a little bit unfamiliar, not the end of the world. It’s not complicated and not as nuanced as ipv4 networking. No dhcp necessary anymore on your local network, how good is that? No more trying to hardcode MTU, no strict/open/hairpin/fullcone/etc NAT issues because no NAT, no port forwarding, no fear of IP collisions, less overhead, freedom of many public addresses per interface - host each app on its own public IP address if you desire. Ipv4 over ipv6 is part of the spec so you would never lose ipv4 connectivity. I could go on
My brain stops me from remembering and recognizing IPv6 addresses. I can’t deal with long strings of hex. And why are people so against me running IPv4 on my own LAN? Do I make you sad? Do I ruin your day? I love IPv4, and NAT works perfectly fine for me. I’m not doing the translation, my router is.
You don’t need to have long addresses, you should be using hostnames and domains anyway. Ipv6 addresses are often simpler than ipv4 ones. E.g. prefix::1 for your router. Prefix::2 for the next device, and so on to Prefix::FFFF for the first 65k machines if you wish to set it up that way. Ipv4 exclusively on your lan ruins my day because I have to maintain servers and software to support users that only use ipv4 and flat out refuse ipv6 connectivity - it’s expensive and takes a lot of effort to maintain dual stack support.
Most of the time I do use hostnames, but it doesn’t matter what I use as a user if I have a list of addresses I have to look through in log files, or enter addresses for configuration or whatever. My brain works on IPv4. I’m sorry for ruining your day, but I assume, or at least hope, that you get paid for the work. I do not and I have more important and pressing things to do than learn IPv6 and reconfigure my whole network.
To expand on this, we have functionally ran out of IPv4 addresses. Meaning IPv6 addresses are required.
Not only that, but ipv6 makes networking easier and less complicated. No longer, needing port forwarding or NAT, amongst other improvements
It’s that necessarily a good thing?
I remember suddenly needing a firewall on my PC back in the days of the Blaster worm.
Do we really want all those crappy IoT devices open on all ports to the general internet?
NAT is not security. We aren’t talking about replacing friewalls.
I’d be fucked if I had to deal with IPv6 at home. Give me NAT, port forwarding and a dynamic public address that changes.
Slaac does everything for you. You get dynamic public addresses that change (you can disable if you please). Nothing to deal with, just open a firewall port if you want to receive traffic
I want static addresses on my LAN, and addresses I can remember and easily recognize in a list. And I don’t want my devices to have unique addresses outside my LAN, especially not static ones. NAT is great.
You can statically number a LAN with fd00::/8 and NAT66 to the internet, if you really want to.
Heck you could set up a ULA or just use a range from your assigned prefix
See, what both of you wrote is completely alien and confusing to me. The look of IPv6 gives me an aneurysm. Let me keep my IPv4. You can run IPv6 on your own LAN. I’m not stopping you.
Roughly speaking, fd00::123 is the IPv6 equivalent of 192.168.0.123
It’s a little bit unfamiliar, not the end of the world. It’s not complicated and not as nuanced as ipv4 networking. No dhcp necessary anymore on your local network, how good is that? No more trying to hardcode MTU, no strict/open/hairpin/fullcone/etc NAT issues because no NAT, no port forwarding, no fear of IP collisions, less overhead, freedom of many public addresses per interface - host each app on its own public IP address if you desire. Ipv4 over ipv6 is part of the spec so you would never lose ipv4 connectivity. I could go on
Nothing stops you doing that with ipv6. NAT is complicated and unnecessary.
My brain stops me from remembering and recognizing IPv6 addresses. I can’t deal with long strings of hex. And why are people so against me running IPv4 on my own LAN? Do I make you sad? Do I ruin your day? I love IPv4, and NAT works perfectly fine for me. I’m not doing the translation, my router is.
You don’t need to have long addresses, you should be using hostnames and domains anyway. Ipv6 addresses are often simpler than ipv4 ones. E.g. prefix::1 for your router. Prefix::2 for the next device, and so on to Prefix::FFFF for the first 65k machines if you wish to set it up that way. Ipv4 exclusively on your lan ruins my day because I have to maintain servers and software to support users that only use ipv4 and flat out refuse ipv6 connectivity - it’s expensive and takes a lot of effort to maintain dual stack support.
Most of the time I do use hostnames, but it doesn’t matter what I use as a user if I have a list of addresses I have to look through in log files, or enter addresses for configuration or whatever. My brain works on IPv4. I’m sorry for ruining your day, but I assume, or at least hope, that you get paid for the work. I do not and I have more important and pressing things to do than learn IPv6 and reconfigure my whole network.
Only for the internet, not private space