I just retrofitted my basic hand crank mill with a 10mm nut, and drove it with a drill. It’s so much faster now, but I do wonder if there’s actual properly motorized versions of what I just did.
Like this. I’m running it through a variable frequency drive to limit the revs
Shit i gotta try this with weed
Obligatory James Hoffman clip.
I could not tell the difference between pre-ground and home ground coffee. I am happy with not having a discriminating palate, since pre-ground is easier.
With dark roast I haven’t found much difference either.
With a local medium roast, I don’t know if it was the beans, but I was able to get a pleasant fruity acidity out of my brew that I haven’t been able to find with supermarket medium roast grounds.
So you motorized a burr grinder?
Idk with just a cheapo electric grinder thing
Wnh not just buy an electric grinder at this point? People use hand grinders because they enjoy the process.
Good electric burr grinders are very expensive.
So are good burr hand grinders. My friend paid as much for his hand grinder as I did for my Breville electric burr grinder.
The Hario burr grinder in the OP is not on the same level. The one I had was about $40, and was so slow to grind that the drill was a gigantic upgrade. It cost me $.50 in parts to use with a drill I already had, which was great for college me. Cost was the deciding factor.
That’s cool then. I’m all for cost saving measures, especially for niche stuff like this which seems to always be overpriced.
And yet the Skerton is still a terrible grinder. Not much better than a blade grinder. Too much boulders and dust. Grind uniformity is just plain bad.
I agree. Glad I got rid of it.
Not really. A Baratza Encore can be had for just over $100 and is perfectly fine for 99% of the coffee population that isn’t doing espresso.
Yeah, my partner bought me one for my birthday and it works great for my different coffee needs. My only gripe is that it’s loud as hell.
When I was choosing between entry level electric grinders, I was down to the Baratza Encore ESP and the Fellow Opus. One of the main reasons I chose the Opus is because it was so much quieter than the Encore.
And you can upgrade the burr in the Encore to the M2 found in their higher end grinders very easily. That’s what I did and it’s quality is top-notch
$100 for a kitchen implement that grinds coffee and does nothing else is more than a lot of people are willing to spend. I have one that was given to me and I really like it, but I wouldn’t pay that much any day of the week. If I had an extra hand grinder, I’d honestly probably do something like this for fun, because I already have these tools for work.
Also keep in mind that now it is possible to get a far better hand grinder than the Skerton for almost the same money. The Timemore C2, the 1Zpresso Q, Kingrinder K1, P1, and P2 are the same price or only $10 to $20 more than the Skerton and all produce far better grinds.
I understand. I hate single use tools. But if I am spending fairly decent money on beans, I want a tool to properly process them. A $20/200g bag of beans is wasted on a Skerton. Other than the beans, a good grinder is the single most important tool in making good coffee.
Because i wanted an all metal burr grinder with no plastic in it at all
Hey! You’re not OP! Everybody, this guy is a big phoney!
I have a pair of Breville/Sage SmartGrinders (which I didn’t pay anywhere near list price for).
One for caff, one for decaff.
I love them, as once I’ve dialed in the grind size for a bean, and set the timer per shot to hit the correct weigh, I can just bonk the button with a portafilter, and get a correctly sized dose.
While I love experimenting with coffee, once the conclusion is reached, I like to nail down the process so I don’t need to think about it until the next bean change.
I do this with my 1zpresso Q2 except I just chuck it directly into the grinder which I find helps keep the beans from jumping out of the grinder.
I do the same thing (with a different grinder) when I need a large quantity of ground pepper.
Seems like I might be a bit bougie. I have a Breville Dose Control conical burr grinder…
I tried this with exactly this bur grinder and it melted the plastic washer in the assembly
Granted, I was using it for flax seed instead of coffee (it was my spouse’s idea), but be careful with that drill my friend
Yes
I have a special drill at work that is just for grinding coffee
At home I my grinder was half the price of my espresso machine.
I used to grind beans at home. But I just don’t care anymore. I just run them through the grinder at Costco.
I had that Harrio as my first grinder, it was alright but the adjustment of grind size was annoying and a single espresso shot took like 10 mins to hand-crank. Within a week I ordered a Eureka Mignon Chrono. Best decision.
Ive since retired my budget espresso machine because having no time to dedicate to upkeep ment it was constantly getting nasty and was just too much hassle, now I have found my happy medium with a chemex.
Did the same thing for a while lol, just had to keep the drill going as slow as possible.
What if you go full speed? Will it break something?
Potentially, you could also melt the grinder and mess up the grind of the coffee.
