I’m trying to run an LED matrix display (with a Max7219 controller) from a raspberry pi pico using rust. There is a max7219-crate that I used. But i am unsure about how to prepare the pins I want to use. Can I Use any of the pins? Do I have to set them to push-pull-output?

  • orclev@lemmy.worldEnglish
    3·
    1 year ago

    If you follow that link I provided there’s an example in there of exactly how to initialize SPI. The example uses it to control a MMC, but most of the setup (except the speed) should be essentially identical for you.

    Here’s a direct link to the relevant example: SPI SD Card example

    Also the example code on the crate itself is a pretty good place to start. It’s using bit bashing rather than hardware SPI, but if you follow everything after the from_pins call and use most of the stuff from the SPI SD card example but init the MAX7219 using from_spi instead you should be up an running in no time.