• qooqie@lemmy.world
    link
    fedilink
    English
    arrow-up
    48
    arrow-down
    5
    ·
    edit-2
    3 months ago

    Oh good eye, I think you’re right especially from the paint on the bumper

    • cRazi_man
      link
      fedilink
      English
      arrow-up
      12
      arrow-down
      4
      ·
      3 months ago

      So reversing the car should flatten the ballard again and get the car free? Or maybe the ballard only went to an acute angle and lifted the car up till the ballard poked through a weak point in the frame. Either way she’s reversed into it at a decent speed…and then completed her yoga class before calling for help.

      • Miles O'Brien@startrek.website
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        3 months ago

        I mean… Theoretically if she had a strong enough drive train, and the car was overall very heavy, she could absolutely back up again.

        However, given the height of the bollard vs the ground clearance of the undercarriage, I believe it would pinch the bumper downward and possibly prevent the car from going anywhere. It depends on how strong the bumper materials are, and if anything from the frame is in the way.

        Source: my ass, but it’s my best guess based on studying more crashes than I care to count.

        • cRazi_man
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          3
          ·
          3 months ago

          Your ass is probably correct.

          Also the bollard was initially pushed down by the rigid frame of the car. Now it is inside the boot. The inside of the boot will be pushing against it.

          Now they’re going to call roadside rescue and going to have to explain how they need a crane rather than a tow truck.

          • Fermion@feddit.nl
            link
            fedilink
            English
            arrow-up
            5
            arrow-down
            2
            ·
            3 months ago

            The bollard needs to be replaced at this point. May as well just cut it off. Hiring a crane is unnecessary.