I’m just wondering about the internal components on mall cop robots like the Knightscope K5. It must be using a GPU and some pretty nice cameras, right? These are common models found in the United States. I have worked closely with knockoff BD dogs, I’m not talking about those, I’m talking about the Dalek looking things.

  • Greg Clarke@lemmy.ca
    link
    fedilink
    English
    arrow-up
    37
    ·
    2 months ago

    Just remember that abducted robot cops can sometimes remember their past even if you erase their memories. But good luck on your new project

    • spacecadet
      link
      fedilink
      arrow-up
      12
      ·
      2 months ago

      Especially Cyberdyne systems, they are a learning computer.

  • friend_of_satan@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    2 months ago

    My guess is that the most expensive single component would be the lidar. Prices on lidars can be well over $100k. When I worked with lidar about 5 years ago, IIRC a Velodyne 128 was $160k. These robots would probably be using a 32 though, which is probably going to be less than 1/4 of a 128.

    Also, Velodyne and Ouster merged since I last used lidar. Ouster does in-device sensor fusion, which likely takes a significant load off the CPU and potentially GPU, meaning these robots may be able to get away with lower spec CPU and GPU.

    It appears that Ouster now does object detection, which is another reason these could get away with lower spec GPUs (assuming they’re using Ouster)

    Obviously there’s a lot of speculation in my response, but since there’s no teardown of the robot, and without spec sheets or a BOM, all we can do is speculate.

    • CondensedPossum@lemmy.worldOP
      link
      fedilink
      arrow-up
      3
      ·
      2 months ago

      Thanks for the actual input, people who haven’t worked around this kind of hardware are mostly limited to goofing around like it’s sci-fi when it’s mostly John Deere style nonsense

  • FuglyDuck@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    2 months ago

    The giant suppositories are usually using nvidia (like everyone else in ai). The cuda/tensor cores are just easier to tap than the AMD equivalent.

      • FuglyDuck@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        2 months ago

        nope. and you won’t see that anywhere, either. those things are ridiculously expensive (and generally less capable than humans.). IfIxit can’t exactly afford to buy one. (well. they could. probably. but it’s a limited audience.)

        I happen to have some inside knowledge on a particularly laughable suppository, though.

        • Pasta Dental@sh.itjust.works
          link
          fedilink
          arrow-up
          2
          ·
          2 months ago

          People throw electric scooters and bikes in lakes and rivers the day they are released in the wild, I’m sure someone would take one and see what’s inside before throwing it in the water

          • FuglyDuck@lemmy.world
            link
            fedilink
            English
            arrow-up
            8
            arrow-down
            6
            ·
            2 months ago

            Are you really comparing a device that costs a hundred or two hundred dollars to buy in bulk and is an incredibly annoying nuisance to anyone who has to deal with them being left wherever the fuck the person driving them decides is ‘good enough’… to a robot that costs hundreds of thousands of dollars with decades of R&D behind them…??

            In virtually every implementation, they’re operated inside a security envelope that would help make it extremely difficult to steal. most of the robots have their own security team behind them, including people that will look for it when it is stolen.

            Even if you do manage to lift a several-hundred-pound robot and run away with it; and get it to somewhere it’s onboard telemetry (including GPS, camera and audio. Probably also ultrasonic) can’t broadcast… and then get it someplace safe enough to do the tear down… posting pictures on the internet may as well paint a target on their back. and just for the record, the painters are the kind of people who own companies like blackwater.

            No, they probably won’t send their goons after you. But you did just embarrass them…they ain’t gonna take that lying down.

  • EleventhHour@lemmy.world
    link
    fedilink
    arrow-up
    8
    arrow-down
    3
    ·
    edit-2
    2 months ago

    Whatever it is, I’m sure it’s vulnerable to a short-range EMP burst. Just make sure to leave your phone and smartwatch at home.

    Local municipalities only have so much in their budgets for this crap, and these things are very expensive. If enough of them fail/are destroyed/go missing forever… well, the local budget won’t be able to keep replacing them indefinitely…

    • CondensedPossum@lemmy.worldOP
      link
      fedilink
      arrow-up
      8
      arrow-down
      2
      ·
      2 months ago

      There aren’t short-range EMP burst emitters, that’s sci-fi pretend. These are real robot flashlight caddies they deploy at outdoor malls in Ohio.

      • Greg Clarke@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        2 months ago

        I suppose a nuclear ICBM could be considered a long range EMP burst emitter. And a nuclear ICBM would be effective at disabling a robot cops but it’s probably overkill.

      • HubertManne@moist.catsweat.com
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        2 months ago

        there is the thing you could do with a disposable camera but we are talking extreme short range. You would need to have an idea where to lay it if it even could get far enough to work and your watch phone would be fine in your pocket.

          • HubertManne@moist.catsweat.com
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            2 months ago

            well they did a very good job and managed to keep the joke going such that no one has outed them. The electronics they mess with though are very simple calculators and placed in the coil mostly. So even if it did work its at a range where its essentially useless.

            • CondensedPossum@lemmy.worldOP
              link
              fedilink
              arrow-up
              2
              ·
              2 months ago

              No clue what you’re talking about at this point. I am talking about real tech that is currently deployed in middle America. I am not talking about pretend or fiction or MI-6 or whatever. Please.

    • umbrella@lemmy.ml
      link
      fedilink
      arrow-up
      1
      ·
      2 months ago

      they are probably vulnerable to being stolen and stripped for parts.

      probably some expensive shit in there.

      • jacksilver@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        2 months ago

        Yeah, that’s what I was thinking. Just need to throw some foil on it and you’ve got a very expensive new buddy.