https://imgchest.com/p/agyvg9qwy89

Been having issues with this Inland PETG. I’ve had so many failed prints. This 230C print temp and 80C build temp print was the least f***ed up print I had so far.

I also adjusted combing to Within Infill and retraction to 7mm at 60mms. All other settings should be default on Elegoo Cura N4P Normal settings

Some of the bridging is fine and there are sections that even look good but the rest are covered in blobs and stringing. The inside as it was printing was making noises and small pieces flew out as it was being scraped and stuff. The top layer shows a bit of what I mean.

I’m kind of new to this and can’t seem to narrow down on what the issues are I found online. I’ve adjusted temps and only made it worse. I raised extruder a bit so that helped. I would like to make it looks as perfect as can be like my PLA prints.

Let me know your thoughts below, I’m happy to try them out.

  • /home/pineappleloverOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Yeah it didn’t go that well. The bottom layer text became unreadable and I stopped the print

    • kek_w_lol@lemmy.one
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Maybe you need to dry your filament? Blobs and stringing sound like a water boiling problem.