So I got around to getting a new digitizer (screen) and replacement battery for an ancient iPhone and got them installed.

Question for those who’ve replaced digitizers…

Any ideas as to why the screen will behave as if its being touched in a bunch of places without actually being touched?

Its not all the time, maybe 2 or 3 times in a day. All I have to do is turn off the screen and wait a few seconds.

This is the second digitizer I’ve replaced but the first time I’ve had this issue. Mostly just curious if there someone more technically inclined/experienced with an answer other than guessing.

  • abc [he/him, comrade/them]@hexbear.net
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Ehh it could definitely be noticeable if it wasn’t done properly. Same thing with like, the flex cable shielding for the battery - if that isn’t screwed in properly it can cause the screen to bulge noticeably. Usually you can both feel and see this though - it’ll feel like you’re pressing down on something when you touch and there’ll be like light leaking from the sides of the screen/it won’t be flush with the sides. This goes for a number of parts on the older iPhone displays - like the home button, front facing camera/mic, and the shielding for both the screen & the battery flex cables. If any of those are seated awkwardly or not screwed in properly, it can cause issues.

    • D61 [any]@hexbear.netOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      well… no bulges anything, so I guess I’ll just ride it out for a few months and see if it stays intermittent. If it gets worse I’ll go back in and poke around some.

      Thanks for info. comrade-fly