What hardware would you recommend for AP’s and dedicated Firewalls? I really value open-source so bonus points if it works without blobs or the hardware is open or has available schematics.

Altough a bit expensive I have looked at Protectli firewalls as an option as the option to run OPNsense and coreboot is attractive.

For an AP, the Banana PI BPI-R3 (R4 if I’m patient) sounds interesting being open hardware and supporting OpenWRT. I am however curious on if it would run on LibreCMC.

  • Godort
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    I have a Protectli box running OPNSense and it’s been great once I figured out how to get its implementation of unbound working with my Pihole.

    • amigan@lemmy.dynatron.me
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      1 year ago

      And they can even use coreboot supposedly, but I haven’t had the butthole to flash it.

      Also, ditch pihole for blocky. It’s faster and uses less RAM, and is far less complex. And it will run right on FreeBSD, no separate machine required. Couple it with prometheus and grafana and you even get pretty graphs just like pihole.

  • MangoPenguin@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    3
    ·
    edit-2
    1 year ago

    A $70 box off ebay will run opnsense quite well. Put in a cheap network card for the extra ports.

    For APs you can buy routers that are supported by OpenWRT and flash them, I doubt a BPI-R3 would have acceptable performance as an AP.

  • loganmarchione@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Are there open source APs? I was under the impression that everything required binary firmware (even if running something like OpenWrt).

    • Killercat103@infosec.pubOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Well If it did I don’t think LibreCMC would be much of a thing. (Linux-Libre OpenWRT to sum it up). But the officially supported hardware seems to be ThinkPenguin, and old APs which isn’t a very rich selection. Unfortunate but thats why I wondered if the Banana Pi would work since firmware is closely tied to hardware.

      • loganmarchione@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        From their FAQ. So it seems there are free 802.11n APs…

        If the device has a DSL modem or an 802.11ac wifi chipset, the libreCMC project can’t support these devices. There are currently no fully free (libre) 802.11ac or DSL modem chipsets

  • grimer@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Oh wow, I’d never hear of Protectli until now and I’m really intrigued. They have a 4 port that looks absolutely perfect! Thanks!