Hi there,

I’m wondering if I could get some advice on why my prints are always failing at 0.2mm layer height

Attached is a pic, the first layers are perfect but as it gets to layer 3-4 I the print does not stick to the previous layers!

Printing at 0.1mm is absolutely perfect, first layer is perfect etc (in my opinion)

Just wanted to have the option for a 0.2mm height so the prints don’t take as long.

Printer is Kingroon KP3S Pro V2 with Klipper Slicer is OrcaSlicer

I can share configs from either if needed, or more close up pics.

Cheers

  • empireOfLove@lemmy.one
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Yeah, extruder scaling is not perfectly linear, as you scale it faster the plastic slips more on the drive rolls, the heat input increase means the melt rate will not be perfect, and you have to fight the viscosity of liquid plastic.

    • nathOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Brilliant, thanks for the insight! Hopefully orcaslicer has a multiplier for each layer height - not just per filament

      • empireOfLove@lemmy.one
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        1 year ago

        I’d assume it does. I’ve always just used PrusaSlicer so I can’t speak to how Orca does it. If it doesn’t allow per-height settings, only per filament, you can always duplicate your filaments and just rename them to each layer height they’re calibrated for. So you’ll have a PLA 0.2, PLA 0.1, PLA 0.07, etc.