FAQ
- When (first) orbital flight? First integrated flight test occurred April 20, 2023. “The vehicle cleared the pad and beach as Starship climbed to an apogee of ~39 km over the Gulf of Mexico – the highest of any Starship to-date. The vehicle experienced multiple engines out during the flight test, lost altitude, and began to tumble. The flight termination system was commanded on both the booster and ship.”
- Where can I find streams of the launch? SpaceX Full Livestream. NASASpaceFlight Channel. Lab Padre Channel. Everyday Astronaut Channel.
- What’s happening next? SpaceX has assessed damage to Stage 0 and is implementing fixes and changes including a water deluge/pad protection/“shower head” system. No major repairs to key structures appear to be necessary.
- When is the next flight test? Just after flight, Elon stated they “Learned a lot for next test launch in a few months.” On April 29, he reiterated this estimate in a Twitter Spaces Q&A (summarized here), saying “I’m glad to report that the pad damage is actually quite small,” should “be repaired quickly,” and “From a pad standpoint, we are probably ready to launch in 6 to 8 weeks.” Requalifying the flight termination system (FTS) and the FAA post-incident review will likely require the longest time to complete. Musk reiterated the timeline on May 26, stating “Major launchpad upgrades should be complete in about a month, then another month of rocket testing on pad, then flight 2 of Starship.”
- Why no flame diverter/flame trench below the OLM? Musk tweeted on April 21: “3 months ago, we started building a massive water-cooled, steel plate to go under the launch mount. Wasn’t ready in time & we wrongly thought, based on static fire data, that Fondag would make it through 1 launch.” Regarding a trench, note that the Starship on the OLM sits 2.5x higher off the ground than the Saturn V sat above the base of its flame trench, and the OLM has 6 exits vs. 2 on the Saturn V trench.
Quick Links
RAPTOR ROOST | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE
Starship Dev 46 | Starship Dev 45 | Starship Dev 44 | Starship Dev 43
Official Starship Update | r/SpaceX Update Thread
Status
Road Closures
Type | Start (UTC) | End (UTC) | Status |
---|---|---|---|
Primary | 2023-08-04 13:00:00 | 2023-08-05 01:00:00 | Possible |
Alternative | 2023-08-06 13:00:00 | 2023-08-07 01:00:00 | Possible |
Alternative | 2023-08-07 13:00:00 | 2023-08-08 01:00:00 | Possible |
Up to date as of 2023-08-04
Vehicle Status
As of July 28th 2023
Follow Ring Watchers on Twitter and Discord for more.
Ship | Location | Status | Comment |
---|---|---|---|
S15 | Rocket Garden | Scrapped | |
S20 | Rocket Garden | Retired | |
S24 | Gulf of Mexico | Destroyed | Destroyed on during Flight Test 1 |
S25 | Launch Site | Testing | Spin Prime and Static Fire |
S26 | Rocket Garden | Resting | No fins or heat shield, plus other changes. |
S27 | Rocket Garden | Scrapped | Common dome imploded |
S28 | Rocket Garden | Pending Raptor install | Previously tested at Masseys |
S29 | High Bay 1 | Under construction | |
S30 | Build Site | Under construction | |
S31 | Build Site | Parts under construction | Assorted parts spotted through S34. |
Booster | Location | Status | Comment |
---|---|---|---|
Pre-B7 & B8 | Scrapped or Retired | B4 is in the Rocket Garden, the rest are scrapped. | |
B7 | Gulf of Mexico | Destroyed | Destroyed April 20th in Flight Test 1 |
B9 | Mega bay | Pending raptor swap and hot-stage ring install | Static fire (August 5th) |
B10 | Masseys | Testing | Cryo testing |
B11 | Rocket Garden | Resting | |
B12 | Megabay | Raceways installed | |
B13 | Build Site | Parts under construction | |
B14 | Build Site | Parts under construction | |
B15 | Build Site | Parts under construction |
Resources
- LabPadre Channel | NASASpaceFlight.com Channel
- NSF: Booster 7 + Ship X (likely 24) Updates Thread | Most Recent
- NSF: Boca Chica Production Updates Thread | Most recent
- NSF: Elon Starship tweet compilation | Most Recent
- SpaceX: Website Starship page | Starship Users Guide (2020, PDF)
- FAA: SpaceX Starship Project at the Boca Chica Launch Site
- FAA: Temporary Flight Restrictions NOTAM list
- FCC: Starship Orbital Demo detailed Exhibit - 0748-EX-ST-2021 application June 20 through December 20
- NASA: Starship Reentry Observation (Technical Report)
- Hwy 4 & Boca Chica Beach Closures (May not be available outside US)
- Production Progress Infographics by @RingWatchers
- Raptor 2 Tracker by @SpaceRhin0
- Acronym definitions by Decronym
- Everyday Astronaut: Starbase Tour with Elon Musk, Part 1 | Part 2 | Part 3
- Everyday Astronaut: 2022 Elon Musk Interviews, Starbase/Ship Updates | Launch Tower | Merlin Engine | Raptor Engine
New comment from /u/santacfan on Reddit:
Starbase Live-
11:05pm- Equipment starting to be brought back in
2:50am- B9’s transport stand is rolled up next to the OLM
9:30am- Lifts have been up and down all around the OLM as well as workers on top. Workers are also on top of the booster transport stand.
10:00am- 4 lifts up at the can crusher at Massey’s. Did they do a test and are inspecting now?
11:08am- Chopsticks closing
11:16am- Chopsticks lowering around B9
11:29am- Chopsticks close in on B9
12:54pm- Stabilizer arms going in
1:07pm- B9 lifted up off the OLM
1:11pm- Chopsticks translate over
1:20pm- Lowering towards stand
1:22pm- Holding above the stand
1:33pm- One of the stabilizers on the stand goes up
1:38pm- Second stabilizer goes up
3:16pm- Lowered the rest of the way onto the stand
4:35pm- Workers on top of the transport stand. Looks like they are checking the hold down clamps.
5:23pm- Workers on the stand appear to be done
7:45pm- Lifts have been up at the can crusher most of the day. They have cleared out now though and it looks like there may be tension on the cables (or might just be because the lighting has changed)
8:46pm- Chopsticks release B9, open and lower some
9:40pm- B9 rollling
9:44pm- Booster stopped after clearing the chopsticks which then fully closed. Light truck turned off
10:08pm- Workers going up to the OLM
10:17pm- Rolling again
10:30pm- Turns on to Hwy 4
11:30pm- Turns into production site
11:35pm- Stops outside of the high bay
11:41pm- Rolls over to in front of the Mega bay
(This gets synced)
Why the booster transport stand? Back to the production site for raptor swaps?
And maybe attaching the hot staging ring?