@flashlight for those asking why I’m not on the pictures, working with the others, I was going back and forth from the stage with equipment, because the stage and backstage are 1,10m above the floor, and van, with no elevator or stairs nearby :D
Live video director / réalisateur de direct
Mais aussi régisseur du spectacle, souvent avec des jeunes.
I like big moving machines, trains, nuclear stuff, electric infrastructure, measuring and plotting things (CO2 ppm charts, thermal camera, GPX traces, #OSM…). ND
@flashlight for those asking why I’m not on the pictures, working with the others, I was going back and forth from the stage with equipment, because the stage and backstage are 1,10m above the floor, and van, with no elevator or stairs nearby :D
@cobysev @GraniteM I have a french version from 1942 and modded it with a pretty low power, 2700~3000 K single LED drop-in, and more importantly a 18650 battery with integrated USB charging. I built a cheap 2D-18650 adapter by hollowing a piece of wood from the bottom and putting a flat-cut screw through the top to make contact. My grandpa use it and is happy with it. Way more runtime, bit more light, same temp.
@Curious_Canid I read somewhere that the last digit is the shape : 0 for cylindrical
@paholg Only in very specific cases, in tight spots, for electricians for example
@Hikermick feet light ftw
@mp3 my little sister (21) just now: “I want that!”
Thanks, I now have an excuse to buy them :D
(And 519A-mod them before gifting them)
@mp3 how did you know I wear Crocs
@flashlight Left to right: TS10 3000 K, MT21C 6500 K DC-fixed, MT21C 519A 4500 K DD DC-fixed, TS10 4000 K.
If you click on the fedi logo you can see more pics.
Also dec 8 in Lyon, FR, is a historical festivity all about illuminations.
@bpcomp I think a LEP defeats this purpose.
@SammysHP So it’s one color at once only? No ramping? Only two brightness settings for each channel, + strobe? Still a cool light!
@fujiwood Messy at the start! https://www.reddit.com/r/flashlight/comments/171lkvk/first_messy_try_at_modding_wip/
Then, since I purchased the LED already soldered on a MCPCB, I desoldered the stock one, ground a bit the new one to fit, soldered the wires back on the new MCPCB and voilà. Changed the thermal paste too.
@flashlight The Nichia heats up faster than the Cree. (IR video on fedi link)
@flashlight Beamshots (on fedi link), still locked settings and 5600K.
@lnsfw3 Qui Sème Danse, first edition of a music, arts, politics festival in rural France
@Schlemmy @Lurkinney Isn’t there an option to disable the voltage flashing? I recall something like that.