Interior or exterior wall?

Mine is about 600w and is mostly powered by solar but if it weren’t would cost me $13 at USD0.03/kwh

Change the IP addresses of the cameras

Drill a hole through the wall next to the door frame

You’re not suuuuuuuuuuuppposssed to. Its not best practice. Blah blah blah. Use a shielded cable, ground it, it’ll be fine. Cat 6 is tightly twisted and 120-220 volts does not produce the kind of interference that high voltage transmission lines do.

Can you change the boot drive. Just install an OS on a usb drive and boot into that, install a vpn and browse the internet in peace.

So sounds like you need 4 PoE ports.

You can get a silent 24 port switch and you can get a silent 8 port POE switch, but a 24 port POE switch is designed for 350w (at least, more if its POE+) of consumption, so you’re going to be dealing with active cooling, and considering most are designed to be rackmounted, that means small high RPM fans.

If you care about noise i’d just get 2 switches, one for POE and one for non POE.

Also, a house is not an office building or a hotel. You might have cat 6 in every room, but most people dont randomly plug and unplug in hardwired network devices in different rooms in their home. As someone whose had a home network for over a decade, i find it perfectly fine to go upstairs and connect a new patch cable when I plug in a new device to a previously unused port. So instead of sizing the switch for every possible connection you might make, size it for what you need now + a little margin, and who knows, maybe by the time you need the rest of those ports, 10G switches and network devices will have become more common and affordable.

My 24 port POE switch is pretty loud. But I have it in my attic along with a bunch of other loud electronic equipment. I also have an 10 port POE switch from TP link which is completely silent. Do you really need 24-26 POE ports?

I have 6a. It’s huge and a beast in conduit and you absolutely can not terminate it in rj45, but it’s fine it your passing it through open spaces like ceilings.

Why bother with the solar panels, just power them off the grid the streetlights are connected to.

Have you tried turning up the gain on the antenna?

Unless you’re using hardware from 30 years ago it shouldn’t matter if you end up making a crossover cable or a straight through cable.

wifi is not noticably slower. 2ms maybe

How far away are you to the server? thats the biggest thing that affects ping

Is this in your house? just pull out the light bulb like you were going to change it.

That’s windows task manager measuring the bandwidth at the network card. Not sure how or why it would incorporate switching overhead.

That can’t be right because I’ve seen higher speeds than that during downloads with a download manager on my 1GBs infrastructure https://imgur.com/a/aIaVpi8