Additionally, what changes are necessary for you to be able to use Linux full time?

  • Statick@programming.dev
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Sure thing, I have a two Sovol SV06’s, one for a 0.4 nozzle and one for a 0.2 nozzle, and a Bambu Labs X1C.

    The SV06’s took me a few weeks to tweak, especially the one with the 0.2 nozzle.

    Here is my cura profile for the Sovol SV06 with the 0.4 nozzle https://filebin.net/ljh52w2lehipzbms

    Just using that outright probably won’t work. What I would do is load up the default Ender 6 profile that Cura has, and then adjust settings based on mine. For instance. You went from a bowden extruder to a direct drive. So you can probably copy my retraction settings as a baseline and adjust from there. You need far less retraction on direct drive extruders (i.e. 0.2mm-1mm for direct drive vs 5mm-8mm for bowden).

    I would also look up CHEP and Teaching Tech on youtube. They have great videos on bed leveling and everything else related to 3d printing.