vscode is king here, even jetbrains feels crap compare to it.

Best solution is emacs on the remote server and get used to the 20ms which doesn’t sound bad IMO, but maybe you have less tolerance than me ;)

There’s no current solution in emacs for what you want and there could never be so I wouldn’t wait for it.

If you run a remote LSP and connect to it from lsp-mode, can the file saves be sent through that? Or does thr LSP only do file checks and refactors and such, not offer raw file get/put?

What do you mean by “stabilise things more”? I’m not sure that my experience is bad because of errors, so I’m probably misunderstanding what you’re saying.

I think the core issue is that software like magit simply wasn’t designed for high latency. If my remote machine was ~0ms away, I think things would work very well with tramp. It seems to me like this is the core problem, and anything that doesn’t address it won’t fix it. VSCode fixes the issue by letting software like magit simply run on the remote machine. It seems like the choice is between that, or rewriting everything to deal with high latency.

I think emacs should adopt vscode remote dev architecture: install a remote server and communicate with it using some rpc protocol. Maybe someone is working on it, I don’t know.

This discussion should happen on the emacs dev mailing list, if you want to involve the core developers.

When possible, I think it’s much better to edit the code locally and synchronize it periodically with the remote. This doesn’t need to be clunky, and is an extension of the fact that you need to periodically synchronize buffer contents with their file a.k.a. save them.

I’ve been using Emacs w/ TRAMP for remote dev for 3 years. I use lsp-mode w/ clangd, eshell, magit. Because of my setup I can’t build locally, both as the project won’t build on macOS and because it’d probably take 45m-1hr to clean build versus a few minutes on the server.

I agree that the experience isn’t flawless, despite using ControlMaster etc I still have latency on save/revert, and staging+committing in Magit too. The worst is getting the ssh sessions “crossed up”, where lsp-mode is transferring some data or a grep job is running and I hit C-x C-f, and Emacs locks up, needing a healthy dose of C-g spam to get it back.

Despite all the problems, I still feel that Emacs is a better remote dev environment for me. I work on a large archaic project with an elaborate build system, multiple “in-house” languages, and Emacs works wayy better for weirdo projects like this than VS Code. The rest of my team, and the company as a whole, uses VS Code and I’ve seen coworkers have it drop out, lock up, and be clunkier than TRAMP in some situations. The amount of configuration to get it working well (especially clangd+lsp) isn’t any easier than Emacs.

IMO all that Emacs needs to let it stand up against VS Code for remote dev is to improve the performance and polish (latency and lockups). The architecture is fundamentally the same as VSCode, especially if you’re using lsp-mode or eglot. Emacs will never appeal to the “Out-of-the-box” users as VS Code does, but for the power users it should still be fast and work seamlessly.

I just ssh into the server and run emacs over ssh. X forwarding works well if the internet is good enough/close enough to the server. All other remote approaches have not worked well for me.

He’s talking concept and you’re taking implemenation.

I almost exclusively use emacs --daemon and then emacsclient to connect to it.

In my opinion, this model needs to be extended so that emacs daemons can’t accept connections over a network. Maybe piggybacking SSH, or some other socket protocol. Of course, never could administrators would have to enable that port, so there are complications in professional environments.

With VSCode it requires nodejs on the server side,

That’s not true.

That’s why I said that model needs to be extended. There’s no reason emacs server couldn’t send stuff over a TCPsocket to emacs client. Emacsclient and emacs server are separate OS processes, so they already communicate via external mechanisms.

Wrong. Vscode server is a binary blob, it only requires glibc. It doesn’t need anything else, like shells. It even brings its own git.

My previous employer did not allow non public source code on a laptop. My solution was to run emacs inside of a screen session (with screen’s C-a mapped to C-t a trick I learned from a colleague since C-t twiddle character isn’t very useful in emacs). This worked well even using terrible cellular wifi and was much better than remote desktop since the amount of data sent per keystroke will typically be quite small.

Without screen this almost works but emacs could hang sometimes when the connection got dropped which screen solves.

On the server. You just ssh -X, and call emacs. You can also use emacsclient on the server and then (also on the server) connect to it with the graphical client. This helps when you want to prevent connection los to break your process running. Or emacs -nw also works. There are no special commands used.

Is this functionality just used by people trying to use Windows and WSL as a development environment?