Currently, I use the following command to set the fan speed of the server after it starts up:

```

ipmitool -I lanplus -H 192.168.31.217 -U root -P calvin raw 0x30 0x30 0x01 0x00

ipmitool -I lanplus -H 192.168.31.217 -U root -P calvin raw 0x30 0x30 0x02 0xff 0x0a

```

The problem is whenever the server restarts, the fan speed will change back to its old state.

That’s really a problem, for example, if I go out and the power goes out and then comes back on. There will be a huge noise made by the server before I get home.

  • diamondsw@alien.topBEnglish
    1·
    10 months ago

    As others have implied, you need to have something run on startup that will execute that IPMI tweak again.

    In my case ESXi auto-starts my VMs, one of which is a docker VM and it auto starts a container that does the IPMI tweak (and monitors temps and adjusts and all that).

    You don’t need to layer it this deep, but fundamentally you need things to auto-start on boot, including this.