Hello! I am trying to replace a wall plate having a small phone plug with an rj45. First time doing this.

The cable itself is a cat5e. On the other end near my switch, there is an rj45 already wired in, so I wanted to check it to know if it’s wired A or B, to replicate on the wall plate. But I have this in the photo… 1-2 is blue ?

How should I wire my rj45 keystone for the wall plate ? T568A or B ? Or following the current colors/numbers ?

This a 2016 construction, in Quebec, Canada.

Thanks a lot!

  • up4whatev33@alien.topBEnglish
    1·
    1 year ago

    Couple issues here… you tx on 1&2 and rx on 3&6… if you need a xover then you flip one end… that being said the colors are wrong… they are just punched in order in the pic which is what you’d do for phone. The pairs are wrapped at different rates which matters from an Ethernet standpoint. So re punch WO O WG B WB G WB B and flip the tx/rx on one end of you need a xover (but you prob don’t)