Ths might be a silly question, but asking those is how i learn sometimes. I’m trying to install my first Linux distro to set up a Plex server and one of the few things I know is you need a wired internet connection. My intended server location is across the house from my router, and there isnt much room there to set up temporarily. It would be possible, just a bitch and a half. Is it instead possible to connect my SSD via SATA to USB to a laptop, install Ubuntu and wireless adapter drivers on it while connected to ethernet, then put the SSD in the server to boot? Or do I need to do all this through my intended setup?

Thanks for the help, just trying to make my first Linux install as painless as possible.

EDIT: Thank you all for your responses, I’m going to respond as I can since I’m at work. I The number one thing I learned is that I need to do more research. I recognize only a handful of these acronyms lol

  • jrgd
    5·
    10 months ago

    Yes, just make sure that the boot setup for the distro install is compatible with what you intend to install it onto (I.E. if your server is going to be using EFI to boot an OS, install your Ubuntu instance as GPT, EFI onto the SSD). Depending on what wireless modules you are using and where you are sourcing them and how you are installing them, you might need to ensure Secure Boot is disabled in the BIOS of your server. This will be the case if the kernel module package you are installing doesn’t sign the wireless adapter driver you intend to use. Otherwise, most drivers you could possibly need should be baked into the kernel and you should be good to go.

    (One further sidenote coming from someone who has not used Ubuntu in a long time (since 16.04’s release), it would be good to check in the /etc/fstab file that the filesystem references are using either UUID or PARTUUID. Depending upon the drive layout of the server you are mounting the intended drive into, traditionally labeled references such as sda or nvme0n1 can change depending upon the slots each drive is seated. Using UUID or PARTUUID in the fstab reference alleviates any potential complications from this scenario where fstab might reference the wrong drive in mounting partitions. I do believe Ubuntu would likely do this by default nowadays, but it can’t hurt to check.)

    • HazmatasticOP
      2·
      10 months ago

      Thanks for all the info. I have no comment since I need to watch like 3 youtube videos and spend another hour reading before I really understand that second paragraph, but I will definitely be referring back to it.

      What I did pick up was that the kernel actually comes with basic hardware drivers, which is a huge relief. I have pretty standard wifi hardware on standby, so I can try that.