So I have a lovely Cirrus 4 that I call my adventure bike. Currently I am running the stock groupset that I would like to upgrade. This bike currently has a hyperglide hub and threaded bottom bracket. What I want to do is get a nice 1-by front ring and have a bigger range in the back. I am totally happy sacrificing speed for hauling so I would like to get something like a 42 in the front, and a 11-42 in the back. I don’t have much experience with these lower tier groupsets and where the mountain bike compatibility starts and ends.

Has anyone done any kind of rebuild like this?

  • OkGoM
    link
    fedilink
    arrow-up
    2
    ·
    30 days ago

    I can’t see why this setup wouldn’t work. I do favour a max of 36T with a smaller chainring up front. The shorter cage derailleur you can have the better. What you have here will work with a narrow wide chainring. You can space the BB for chainline :)

  • OkGoM
    link
    fedilink
    arrow-up
    1
    ·
    1 month ago

    I have done this kind of thing before. Grab a 32T hollow tech single ring crankset, hollow tech BB and something like a 10 speed 12-32 or 12-36 cassette. This means you can use a better derailleur and better quality cassette (both being cheaper than if you bought 42t) and still be able to climb walls :)

    • Aniki 🌱🌿OP
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      1
      ·
      edit-2
      1 month ago

      Do you think I would have an issue with a crazy chainline with something like this or should it all work fine? The long cage derailleur is good for up to 46 and the 36t in the front will give me a least a LITTLE speed in the flats.