• RandomStickman@kbin.run
    link
    fedilink
    arrow-up
    9
    ·
    edit-2
    14 days ago

    I’m no axeologist but I feel like the axe head can’t withstand much whacking before bending and would block the barrel. Thankfully it’s probably just a wall hanger.

    • Anyolduser@lemmynsfw.com
      link
      fedilink
      English
      arrow-up
      9
      ·
      14 days ago

      Amateur axeologist here.

      This isn’t your “I’m going to chop down a tree” tool. The head of this thing was either for messing fools up, or for busting brush, not heavy use.

      Given that, the structural weakness is worth it in this case. Pushing the axe head a little farther out lengthens the “handle” (gun) and provides more leverage. That leverage comes in handy when hacking through both bushes and fools.

  • gibmiser@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    1
    ·
    14 days ago

    I think id really prefer the pointy side and the boom side be the same side…

      • gibmiser@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        ·
        14 days ago

        Oh, got it. Assumed the whole length was a barrel.

        Shit, with the barrel that short I think the hatchet is the better bet

        • setsneedtofeed@lemmy.worldM
          link
          fedilink
          English
          arrow-up
          8
          ·
          14 days ago

          According to some cursory searching and Wikipedia referencing (so take the credibility at your own peril), axe guns were primarily thought of as axes, and the firearm part was secondary.

          The Swedish navy issued axe gun has a more practical profile than the ornate gun in the OP, if that gives an idea how such an idea might be practical.

      • Emotet@slrpnk.net
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        3
        ·
        14 days ago

        Pretty sure it isn’t. Apart from not being a very logical placement:

        • The hammer points downwards and has to be pulled back to cock it
        • The Axe head is shaped in a way as to provide a shoulder stock
        • If the end of the barrel was on the upper end instead of the lower end, it would be practically useless
  • muzzle
    link
    fedilink
    English
    arrow-up
    7
    ·
    14 days ago

    Straight outta some final fantasy.

  • electric_nan@lemmy.ml
    link
    fedilink
    English
    arrow-up
    5
    ·
    14 days ago

    I saw a ton of these in Prague castle. Gun-axes, gun-swords, gun-knives. Also a child sized suit of armor.

  • JustCopyingOthers@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    ·
    12 days ago

    It looks a bit fancy but it was common for muskets to be used as clubs when they’d been fired and there was no time to reload. I guess bayonets are the modern variant of this idea.

    • setsneedtofeed@lemmy.worldM
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      12 days ago

      I’m no expert on this corner of history, so take this for what it’s worth, but military issued axe guns, and guns with bayonets existed at the overlapping times.

      If I recall correctly, bayonets were an outgrowth of pike and shot warfare, where eventually the duties of the pike were taken over by the bayonet in infantry use in open field warfare.

      Axe guns were used by cavalry, which makes sense as a short and swingable weapon; axe guns were issued to naval troops as boarding weapons, which makes sensible for the close quarter combat compared to a bayonet on a musket.