Have you considered looking at graphics cards which prices are not overly inflated aka not nVidia cards?

Also what’s your budget?

Keep in mind two things:

• That board is PCI Express v3, so assuming your motherboard is the same, there are some newer graphics cards with PCI Express v4 that, although backwards compatible, won’t perform quite as well in a motherboard with only v3 as they do in their benchmarks. This depends on the game: roughly the higher the number of vertices on screen the worst the impact of it running on a lower speed bus than it’s capable of.
• That board has a TDP (roughly how much power it uses) of 170W. From what I’ve seen recently, that’s actually on the mid-low range of power consumption. Some cards out there can be real monsters using something like 350W. Higher power consumption means more demands from you PC power source (which itself has a maximum power it can supply, and whi lst the one ypu have is surelly fine for what you have, it might not be enough if you get a card that consumes 200W more). Also more power consumed means more heat being emitted, so more fans running for longer and harder, hence more noise. So take it into account.

I’m currently upgrading my own GTX 1050 Ti mostly because I need more GPU memory to run Stable Diffusion locally and ended up just getting an RTX 3500 in part chosen because its TDP isn’t much higher (the GTX 1500 Ti was maybe one of the best desktop boards ever in terms of GPU power per Watt and had a TDP of 70W(!)), partly because it’s v3 so “only” one PCI generation beyond my motherboard (which is v2) and partly because my entire rig is old and near end-of-life and I’m just doing a short-term upgrade until I put together whole new rig (and I’m tempeted to get a Mini-PC whe AMD finally gets around to making a suitable CPU core with their new and very promising 960m GPU core available to generic Mini PC makers) and thus refuse to spend tons of money on a card meant to be a temporary thing so that I can run advance AI engines now.

Beyond this and more in general, as always remember that the performance per dollar curve peaks at cards somewhere in the mid consumer levels - buy a high end monster and you’ll be paying a lot more for only a tiny bit more performance and it’s probably going to be something that uses a lot more power (higher end stuff tends to run at higher clock speeds) hence put out more heat and be more noisy. It’s seldom worth it to spend a ton on top of the range IMHO, as with the same money you could get a good card now PLUS in a few years get a good card then which will beat present day top of the range cards (whilst consuming a fraction of the power and making a fraction of the noise).

My recommendation is that you look in one of the many comparison sites out there at their “value” (I.e. performance / price) charts and limit yourself to PCI Express v3 boards unless you’re planning on updating your motherboard and CPU at a later date whilst keeping the card (or it already supports v4).

What’s your budget? For $300, you can get an RX 6750 XT. It can handle 4k decently well (I’ve only tried it with Quantum Break) and has a performance about a little better than an RTX 3070 Ti. For sure there still aren’t many great picks below $100 that aren’t about 6 or 7 years old.

The issue is that I have a 4k monitor and my current card can barely handle my desktop, never mind a game.

Try running games at 1080p (1920 x 1080), which is exactly 1/4 of 4K UHD (3840 x 2160). Your graphics card will only need to do 25% of the work but you shouldn’t get any resolution scaling blurriness because everything divides evenly. This isn’t so much for your current card, which probably just can’t keep up with newer titles. What you can do is look at 1080p performance of current cards, decide how much performance you need and how much you’re willing to spend, and that’ll narrow down the selection a lot.

Coming from a GTX 760, almost anything current gen or current gen minus 1 is going to be a massive upgrade. It’s hard to recommend a specific card without some info on your budget. For example if you had a budget of $300 US I’d recommend an Nvidia RTX 4060 since it has the best 1080p performance within that budget, or alternately a Radeon RX 7600 if you’d prefer not Nvidia (e.g. if you’re on Linux, the Radeon driver story is a bit better).

I don’t want to bag on you but there is a reason why 1080p and 1440p monitors are a thing. Less pixels are easier to push. That said try turning down you resolution. For instance I have a 4k tv but can only run it and games at 1080p.

The jump to 4k for gaming is quite significant.

What GPU do you have your eye one at the moment? And what kind of games?

Just downscale your 4k monitor

I have a 43” 4K TV as my monitor but I run my games at 1440p native pixel sizing. It makes it like a 27” 16:9 monitor which is plenty big and I don’t need an overkill card for it.