I undervolted my CPU about a year ago and haven’t had any issues with it till now. I’ve been dual booting Linux recently and noticed whenever I was in Linux it would crash/reboot after a couple of hours or less of using it. I noticed the behavior was similar to when I set the voltages too low when initially setting up the undervolt so I disabled it and haven’t had any crashed since. Any idea why it would be stable on Windows but not Linux? I tried a couple of different distros as well. I’ll probably just raise the voltage until I get it stable again but I’m interested to know what could cause this! If its relevant my CPU is a Ryzen 7 3800x

  • drspod@lemmy.ml
    10·
    1 year ago

    What kernel version are you running? I’m no expert but I’m pretty sure that Windows and Linux handle Ryzen power states differently, as there have been some changes to the kernel recently to improve power state handling on AMD. I don’t know whether the latest kernel would fix the issue but might be worth a try to rule that out.

    • Infernal_pizza@lemmy.worldOPEnglish
      4·
      1 year ago

      I’m on 6.4.12 so not the very latest but close. You did make me think to check the CPU frequency scaling though and I’ve spotted a couple of things it could be. I seem to be using the acpi-cpufreq driver rather than amd_pstate, not sure if its worth switching over? It also seems to be set to keep the frequency between 2.2-3.9GHz whereas on Windows my CPU almost always boosts to around 4.2-4.3. I might change that if I notice any performance issues but tbh I might leave it for now and see how things go. It might run a bit cooler if its not always boosting and I can probably still undervolt just not by as much

      • SteveTech@programming.devEnglish
        4·
        1 year ago

        It might run a bit cooler if its not always boosting

        I’ve heard that amd_pstate is a lot more power efficient (thus cooler) compared to acpi.

        Like I believe amd_pstate has a lot more states than acpi-cpufreq so it gives Linux much more granular control over the CPU’s performance.

        • Dremor@lemmy.world
          4·
          1 year ago

          I can validate that. Switched my NAS to amd_pstate, went from 2.12 kW.h per day to 1.95 kW.h per day.

  • rambos
    7·
    1 year ago

    Stable overclock on windows doesnt mean it will be stable on linux. I have intel CPU, but almost the same experience. I had to find different voltage and clock (I went from 4.8 to 4.7 GHZ)