While they were happy with what the fairphone 4 brought to the table, they seem to like what was changed for the fairphone 5.
What are you guys’ opinions on this? A welcome change? would you get one if your phone died within the next year?
While they were happy with what the fairphone 4 brought to the table, they seem to like what was changed for the fairphone 5.
What are you guys’ opinions on this? A welcome change? would you get one if your phone died within the next year?
Is that really that much of an issue in the age of USB-C?
Yes, the 3.5mm jack is more durable than USB-C (since it is rotationally symmetric twisting doesn’t apply force to the connector), it maintains compatibility with billions of audio devices and doesn’t block your charging port if you use it.
Begs the question why aren’t charging jacks designed like audio jacks?
If you wanted them just for charging it would be fine. Barrel jacks are still pretty ubiquitous.
If you want them to also be data they get less great. They make 3.5mm/etc jacks with 3 “pins” and I assume more. But every time you’re inserting/removing the cable it’s rubbing past the insulators separating the contacts. Their failure per plug/unplug is higher than something like USB-C where the 24 contacts are being pushed together instead of brushing past each other. It would suck if you put in your USB-barrel and one of the contacts broke/bent.
Typical stereo headphones have 3 pins. Left, right, common ground. Tip, ring, and sleeve (not sure if the conductor order).
4-conductors used to be common for portable camcorders and early digital cameras. They’d put our composite a/v (extra conductor for video/yellow, still a shared ground). Tip, R1, R2, sleeve.
I’ve seen USB 2.0 (or perhaps 1.x) done over a 4-pin 3.5. And I’ve seen RS232 over 3.5 a number of times too (used to be common in ham radio in the 90s/early naughts).
The video ones are what I was thinking of. Fair enough that I forgot to count ground.
It’s actually a bit crazy - and very impressive - that the cable I use to tickle-charge my phone at 15W could also be used to connect four 4K screens, an external GPU, multiple 10GBe network adapters all while providing well over 200W of power… if my phone supported and of that, that is.
That’s just the USB-C standard, to get 200W and 4k video you need the fancy shielded high-gauge cables.
Well for only 4k, a relatively normal USB-C cable is enough, the fancy cables are for 20 and 40 Gbit/s which is only needed if you gl crazy with your FPS | Hz (more than 60Hz | FPS
There are plenty of products out there that use TS style audio plugs (more 2.5mm in my experience than 3.5mm) for DC power for portable devices. When you get to data transfer requirements, the higher pin counts of current connectors wouldn’t be space efficient.
They could just make magnetic connectors with a shallow socket. But those would last longer and you wouldn’t need to keep buying new stuff.
CC: @Petter1@lemm.ee
I love the CC. Makes this conversation feel more formal.
Yes, it does impart a sense of gravity to otherwise mundane chatter. The only thing missing is letterhead with a monogram.
For some reason I don’t yet understand, my fediverse server inserts the CC in some replies and I forgot to catch it. I haven’t had time to analyze the rooster’s guts yet.
too many bits of magnetic gunk collect on those for my liking. Not as much of an issue on laptops, but with a phone carried in a pocket all day it quickly became an issue for me
Idk of any phone that had them built in, I just used one of those magnetic usb adapters you find on amazon
See, you just described a thing and made a statement, but I don’t buy that one bit. I’ve broken several 3.5mm plugs but never once a USB-C.
I’m on the side of 3.5mm in phones, but there’s a reason XLR and 1/4" are the industry standards for audio.
I’m the opposite. I’ve broken several USB-C connectors, and not one 3.5mm
XLRs on phones? I can get behind that.
I’m sorry what? The 3.5mm is better because it’s rotational symmetrical?
Thats a minor win. You rarely really need that rotation capability, and what little you need can be made up with thinner cables (which is easier with a digital signal and DACs in the headphone, which can’t be done compatibly with 3.5mm and people are dumb) The you also have to sacrifice connection friction to gain rotation, and that has tradeoffs, especially when that friction is caused by a spring-loaded conductor (which also means more friction likely means fewer insertion cycles before friction starts dropping off).
It also really sucks at strain relief without massive dookie springs or rubber butts…and the bigger the strain relief, the more subjective it is to perpendicular force, which is really easy to do on a 3.5mm diameter cylinder of gold-plated iron/tin alloy with the fulcrum also being at the base of the cylinder.
Other cool thing about what could be done with USB-C headphones. A lot of companies put lead weights full-sized headphones for balance or comfort (more weight makes it feel more secure). Good Modern drivers don’t need to be as heavy as they used to be. How bout instead of weights, they use lipos? Now your headphones can charge your phone (when in wired mode, hell, I’m talking about fictional mid/high-end cans, they could have Bluetooth and ANC while we’re at it since they have power), and your charger port point is essentially moot.
3.5 jack port is definitely not more durable than USB-C. If you have good headphones, the change that the 3.5 plug is gigantic in length and the cable thicc AF which causes a lot of stress in the plug due to very large leverage. Additionally, I prefer to use the DAC integrated in my headphones rather than using the low quality tiny DAC in my phone. And in digital, the cable thickness does not matter really.
Very few people are plugging their large headphones into their phones though. For a more reasonable pair of portable headphones or IEMs the size of the plug isn’t a problem.
But congratulations, you have hit on my biggest audio pet peeve! DACs matter very little these days. Anything talking about DACs and not the DAC/Amp stages is marketing BS. Even dirt cheap DAC chips will acoustically transparently convert the digital signal to analog in audio frequencies because it is so basic to do. DACs on their own are useless for audio anyway, what really matters in your audio signal is the amp circuitry after the DAC that applies gain to the signal to useful levels as the choices there do make an acoustic difference if the design is poor.
What makes you think the DAC/Amp in your headphones is going to be better than the one that is built into the SoC of your phone? I don’t think I’ve ever seen any measurements of headphone DAC/Amps.
I learned that from my father, who mostly listen to music from his phone using external headphone amp for his bayer dynamics studio headphones, or uses digital out (via Bluetooth) and let his other Bayern dynamics active headphones do the DAC. He is sure that he hears the difference, but of course that could all be in his head alone. I myself am not a hiFi enthusiast, I only find the tech behind it very interesting. (I listen to music using airPods and in my car using CarPlay, sorry iPhone user here, but thinking to migrate as soon as my iPhone X becomes unusable) But given my interest in tech, I appreciate the explanation, that cheap DAC chips are very good as well, these days.
I don’t get why you get so much downvotes, because it’s not as obvious as people make it out to be and there are plenty of adapters. So it’s a good question.
But yes. The 3.5mm jack had the thing companies say they are striving for: simplicity.
DACs are nice and everything but the phone can just decide to not connect properly. The DAC can decide it had enough of your phone. In either case you’d need to reconnect them. And that means unlocking your phone, because a secure phone will block streaming to ‘unknown’ USB-C devices, unless it’s unlocked during the negotiation phase. And if your connectors have become wonky for whatever reason: Well, no music for you.
And then there’s the issue where you have to have them at hand when you need them. In your car, on your person, while at work.
3.5mm is great because it actually “just works”. One of the few things that can claim such thing.
I recently bought a phone that lacked a 3.5mm jack, so I bought a splitter with a USBC charging port and a headphone jack. The problem I encountered was that the splitter reported to the phone that headphones were connected even if they were not. I was used to unplugging the headphones and have playback automatically pause, and resume when the headphones were put back in. With the splitter I was no longer able to do that. I don’t know if I bought a cheap ass splitter or if that’s the normal behavior for these things.
This is not the normal behavior, but I’d consider the adapter part of you headphone cable and just leave it on there. If you want to unplug, just unplug the headphones (including adapter) from the phone?
That means the charging cable also needs to be unplugged if I want to step away. Thanks for the info about it not being normal, I guess I just got a POS splitter.
Ah, so thats what you meant by splitter. Might I suggest, there are some very cheap battery powered Bluetooth receivers. Those might be a good solution for you, in case you hadn’t considered something like that.
Yes, that’s actually exactly what I ended up buying. It’s got a pause/play button, so I hit that and take the whole thing with me.
Negotiation is a thing for sure. It is possible, though I haven’t ever seen it implemented, that digital audio over USB-C or bluetooth can be blocked by DRM. It would seem business suicide to do something like limiting audio output to certain audio products but I wouldn’t put it past any short term minded profit seeking enterprise.
Yes, I should be able to play music, AND charge the phone without a 9 wire adapter like those universal charger plugs from 10 years ago. Wild concept. I wonder when phone tech will be able to support such a thing
I think phones should have 2 USB-C ports
Only if I can charge 2x as fast!! 😉
There is one that offers this, it has to batteries as well.
Live by the wire, die by the wire(with a 3.5mm plug/jack of course)
This and most phones literally let you do what you’re saying right now.
Yes, it is.
OK
my issue right now is that i use one of those charging + 3.5mm splitters in the car, but when they’re both connected there’s a loud ass buzz. a 3.5mm ground loop isolator works but made bass sound terrible. i’m probably gonna get an old phone just for music in the car 🤦🏽♂️
Just get a new car pleb.
Honestly Bluetooth in a car has been a must for me for like 10 years now. And having experienced CarPlay, that’s def next (especially for cars that support wireless and have a Qi spot. Thats practically magic)
i like my car :( and i’m paranoid about features in new cars. i can hear a noticeable difference in quality with bluetooth vs wired too. never been a fan
regardless, cars that people primarily use 3.5mm for aren’t going away too soon!
You should do what I did and just fuck up your ears with loud car stereos in your teenage years. Now I can’t tell a damn bit of difference.
honestly, not a bad idea. i’ve already got the tinnitus but i need to step it up
I upgraded my car without Bluetooth using a carPlay ready touchscreen auto radio to replace the old thing that was mounted in the DIN drawer thingy
CarPlay transmits audio over wifi
oh huh, good to know. if android auto doesn’t already too, hopefully it will by the time my arm is twisted into getting a new car
You can retrofit a head unit or a screen to an older car. It works really well and gives so many more years to an older vehicle.
Look for “CarPlay screen” on amazon
oh i know. i’ve just been on the fence about that since it’s got 200k miles haha. it’s rocking an amp with the stock headunit
I can very much recommend! It’s nearly as buying a new car, at least for me xD
Even if they gave us a second usb-c port instead of a 3.5mm jack I’d be fine with that, don’t make me choose between charging and decent audio
The car doesn’t have Bluetooth connection?
nah, it’s an 08
deleted by creator
In car, I can recommend using android in the car using the touchscreen of the car. There you can manage audio as well as charging the phone. One cable to rule them all.
Yes, it’s fucking ridiculous! My cans are now either useless or cumbersome and everything else sounds awful! It’s like you people who just want some noise have never even heard decent audio!
I’ve got the Bose QC 45 headphones which can do both Bluetooth and 3.5 mm. The audio quality is the same between the two delivery methods. The only difference I’ve noticed is an occasional video/audio synching issue with Bluetooth which quickly corrects itself and is usually only an issue with older devices. It’s my understanding that this and the audio lag issue have been solved recently in newer devices.
I personally think Bluetooth is a shit standard that has slowly been fixed over the years, but it’s pretty much 100% there at this point
The real question I have is: is a decent DAC that hard to find? I bought a shit one because it’s only a back-up option for me, but I can’t imagine the good ones are scarce.
Tell it to the phone companies. A DAC and amp should be part of my phone.
Bose is shit.
No, the DAC used should be one that the headphones are designed for, so using integrated DAC of the Headphones should lead to best results just using a high end external DAC would be better.
Lol, your phone has not a good enough DAC that this would be hearable ä, but you do you
No way i’m carrying a dongle
New headphones come with lightning and USB C cable these days
I ain’t buying new ones either
See it positive: you don’t have to choose from many phones if you that much want a headphone jack 😄
Attach the dongle to your wired headset.