Hi I have in my home 1 Gbps speed provider, I have a PC wired by fiber and if I make a speed test with one of the many internet pages I do get the 1Gbps (arround 950-980Mbps). The issue is I have also a Wifi access point wired also by fiber, so I guess the access point should be feed with 1Gbps. My problem is when I make a speed test in my Phone or iPad, connected by Wifi, even only cm away from the access point and full Wifi signal I only get around 50-70 Mbps. Is this OK?. Yes I know with the wired connection I get much more speed, with fiber even more, but is it normal this massive difference with Wifi compared to wired??, maybe the capacity for a phone or iPad device is much lower than a computer?. The access point is a TP-Link TL-WA1201, I know there are better ones but I guess is a normal one that should work ok.

  • OnlyTilt@alien.topB
    link
    fedilink
    English
    arrow-up
    1
    ·
    10 months ago

    I think you mean that your AP and computer are wired by ethernet not fiber, that router does not support SFP+ so its not possible to be a fiber connection. From your updated comments for a budget AC Wave 2 wifi router that speed seems acceptable, you can try to increase your channel width and see if that helps but if there’s a lot of interference from neighbors then that will be the speed you get.

    • papolo2001@alien.topOPB
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Sorry yes, I have plastic fiber (pof) to a switch/converter and from there by normal wiring to the PC and the AP that are in the same room. I know the AP is getting the 1Gbps because the PC is getting them also.